View source for HP 15C

[[Category:Scientific calculator]]
[[Category:HP]]
[[Category:Pocket calculator]]
[[Category:RPN]]
[[Category:Segmented LCD]]

{{Infobox calculator|name=HP 15C|processor=HP 1LF5, 1LM2, 1LQ9|introduced=1982|discontinued=1989|type=Scientific|frequency=200-230KHz|supply=3x SR44/LR44/AG13|prog_lang=Keystroke}}

The '''HP 15C''' is a high-end scientific programmable calculator of the [[HP Voyager series]]. 

== Features ==
Introduced in 1982 and discontinued in 1989 in favor of the Pioneers, it shares the shirt-pocket sized portrait housing with its Voyager siblings. Due to the limited keys available, this model utilized double shifts, marked as f and g and indicating functions printed in yellow and blue respectively, making most functions two-key combinations, with indirection for less used functions like matrix operations and conditional tests.

The backplate details the battery configuration, loop behavior of ISG and DSE, and the common metric to imperial conversions on the first row. On the second row, register usage breakdown for statistical functions, two-argument functions behaviors, error codes, program conditionals and matrix operations are provided. In the bottom right corner is an FCC legal disclaimer.

A ten digits plus negative indicator LCD without contrast adjustment. 7 mantissas (8 when exponents are positive) can be displayed at once, or 10 digits of decimal, depending on format setting (FIXed point, SCIentific notation, ENGineering notation). Five alphabetical labels (A-E) double as both matrix descriptors and programming labels. 

Functionality wise, it is unique in all HP calculators in having a "complex stack". Complex numbers are stored in the cartesian form, with the real part in the X register. When in this mode HP 15C does math in radians mode save for coordinate conversions (which obeys the selected mode). CHS and stack clearing operations do not apply to the complex stack, and values can only be entered by appending the complex part with an I or using the Re<>Im swap function. Notably, SOLVE, integration and matrices only take account of the real stack. Other complex operations that have multiple solutions return one along a defined principal branch. behaviors This behavior is toggled by flag 8 and lights the C annunciator. To exit this mode user has to manually clear flag 8. 

The HP-15C features 448 bytes of user-available RAM, allowing at most 64 numeric registers, or 224-448 lines of code each of two or one bytes. As a general rule of thumb, functions that use indirection or have a register as argument takes up two bytes as well as integration. User can DIMension the boundary of the register space, leaving memory to be allocated to program steps or in support of advanced functions as necessary. SOLVE function takes up 5 registers from the unallocated pool, 23 for numerical integration, but only 23 if used together. Toggling flag 8 to put calculator into complex mode takes another 5 and matrices cost 1 per matrix element. Enough memory must be available, or the calculator will raise an error. Ten flags, flag 0 to 9 are available (however no indicators are provided except flag 8 or 9). 

The user can address 20 registers directly from R0 to R9 and then R.0 to R.9 (counting as 10-19). Two registers R0 and R1 are always available (DIM 2). The indirect register (i) can be used to address registers (such as STO, RCL, X<>), address matrices (in concert with value stored in R0 and R1, matrix elements), transfer program execution (negative value indicate line numbers), set flags and display formatting. according to the value stored in the I register. 10 tests and matrix operations (detailed on the backplate) can be called using their respective functions plus a numbered argument. 

As with period HP calculators, numbers are stored as 7 bytes (56 bits), 10 digits decimal mantissa plus two digits exponent Binary Coded Decimal (BCD). Internally 13 digits are used for higher accuracy, but the result is always rounded to 10 digits when delivered to the X register.<ref>Eric A. Evett, Paul J. McClellan, and Joseph P. Tanzini: ''Scientific Pocket Calculator Extends Range of Built-In Functions'', HP Journal, May 1983</ref> In practice this results in a at worst 9th digit correct result for built-in functions, and at worst 5th digit correct result for individual components of complex result.<ref>''HP-15C Owner's Handbook,'' June 1987, Edition 1</ref> Numerical overflow will toggle flag 9, stop program execution (if any), return +/-9.999999999E99 and start blinking the display. Underflow is silent and return a 0. Flag 9 can be used standalone for blinking the display under program control without execution interruption.

Matrix math is implemented for up to 8x8 and supports common operations like LU decomposition, transpose and inversion. Singular matrices are perturbed slightly to avoid singularity. Euclidean (or Frobenius) norm and element wise absolute max can be calculated. Even complex matrices can be solved, expressing a complex matrix as a real matrix up to twice its size, as outlined below:<syntaxhighlight lang="text">
For the 2x2 complex matrix:
| a1+ib1 a2+ib2 |
| a3+ib3 a4+ib4 |

Partitioned form (4x2):                 
      | a1 a2 |                     Complex-like form (2x4):                     
      | a3 a4 |        Cy,x->              | a1 b1 a2 b2 |            
A^P = ---------                      A^C = | a3 b3 a4 b4 |                          
      | b1 b2 |        <-Py,x                                        
      | b3 b4 |

   /|\     MATRIX2
    |         |
 MATRIX3     \|/ 

Symmetry form (4x4):                                            
     | a1 a2 | b1 b2 |
     | a3 a4 | b3 b4 |
 A~ = ----------------
     | b1 b2 | a1 a2 |
     | b3 b4 | a3 a4 |

Which exploits the following relations:
For inverting: 
(Z^(-1))~ = (Z~)^(-1)
For multiplication:
(YX)^P = Y~X^P
</syntaxhighlight>

== Construction ==
Earlier models of HP-15C are constructed using two board connected with a flexible piece. The screen board contains the LCD on the front, and initially three chips on the back, a combinational Display-Driver-RAM-ROM (1LE2-0321), containing 6x10 kilobytes of ROM and 43*56 bytes of RAM, another auxiliary RAM-ROM chip (1LH1-0302) and the CPU (1LF5-0302). The keyboard PCB is heat-staked into the top frame. Finally, a plastic ESD shielding tape and plastic sheet wraps around and shields the PCB. This model may be preferable as it is possible to swap out failed LCD with ones from much more available HP-12C. 

Later models switched to a single board design, with the entire PCB heat staked to the top frame. used a new CPU (1LM2-0001) with a Display-Driver-RAM-ROM (1LH1-0306), and finally an auxiliary RAM-ROM (1LH1-0302).

Apparently the 1LM2 CPU is redesignated from the 1LF5<ref>http://www.brouhaha.com/~eric/hpcalc/voyager/variants.html</ref>. 

At some point this was changed to a two chip design, with the elimination of the auxiliary chip. This model is equipped with a Display-Driver-RAM-ROM chip (1LQ9-0325) and a newer CPU (1LH1-0302). With this change the LCD multiplexing is increased from 2:1 to 4:1 at a slight cost to contrast & worse ghosting.

== Repair & Modification ==
Later models of HP-15C, powered by a 1LM2-0001 processor derives its clock signal from a parallel LC oscillator. Roughly around 1986 this circuit changed from throughole components mounted on the screen side of the PCB to using SMD components on the backside of the PCB. This allowed easy modification as only four rubber pads and four screws are required for access to it. For machines made in the transition period with provisions for both SMD and throughole construction, it is possible to cut the traces leading to the original capacitor or inductor, and solder new ones in place on the SMD pads. This mod is also applicable to the earlier machines as success has been reported on 1LF5 machines, which the screen and ICs are mounted on a separate PCB which is connected to the keyboard through a flexible link, although the exact procedure is not know.

In addition, for older HP-15C with throughole components, the bypassing capacitor that filters the powerline, and provide standby power for retaining RAM content while changing battery, is a 22uF electrolytic capacitor mounted inside the cutout under the battery compartment. For SMD type, this is replaced with a surface mounted 22uF mounted under the X-key position, far from the LC. This should ideally be replaced with a smaller capacitor near the LC and a larger one on the other pad, for both better filtering and longer standby time with increased standby current draw at higher clock rate.

As delivered, this circuit is composed of a 180uH inductor and 180pF capacitor. Since the oscillating frequency of a LC circuit is determined by f = 1/[2 x pi x sqrt( L x C )], swapping in a smaller capacitor or inductor will expectantly increase the clock frequency of the HP-15C, achieving an overlock. This procedure is also applicable to similarly constructed Voyagers. A caveat, however, is a 12-20pF (value of 15pF has also been reported) parasitic capacitance has been reported as a result of the circuit design, with the larger value likely a result of manual soldering of SMD components. This, as well as component variability, especially for small capacitor and inductors sourced through internet, should both be factored into when considering such a modification.

The quality factor of a series RLC circuit is Q = 1 / R x sqrt( L / C ), and ideally, care should be taken to maintain a similar (if not larger) L:C ratio for modifications. The resistance of inductors tends to be smaller given smaller inductance, due to the shorter coil length, all things being equal. A high quality factor indicates a less damped oscillator that dissipates less energy per cycle and oscillates more consistently around its central frequency. 

Some modifications have been reported in literature, and we report some of the known speedups achieved:

[https://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv016.cgi?read=99306 Gerson W. Barbosa] reported, in Septermber of 2006, on an earlier machine with throughole front mounted machine where the traces to the original capacitor was cut and new ones mounted. He reported a 12pF parasitic capcaitance, and reported speedup by timing execution of the self test (ON+X):
{| class="wikitable"
|+Gerson W. Barbosa's Reported Speed Gains
!CPU
!Modification
!L
!Part Used C
!f / f0
|-
| rowspan="8" |1LM2
| rowspan="8" |Replacement 
of capacitor
| rowspan="8" |180uH
|100pF
|1.27
|-
|82pF
|1.38
|-
|50pF
|1.7
|-
|47pF
|1.75
|-
|39pF
|1.88
|-
|33pF
|2.00
|-
|27pF
|2.15
|-
|22pF
|2.30
|}
[http://www.brouhaha.com/~eric/hpcalc/voyager/speedup.html Ken Sumrall] reported, in around 1990, of attaching an additional inductor in parallel with the original. The reported speedup is determined by timing the execution of the self test (ON+X):
{| class="wikitable"
|+Ken Sumrall (brouhaha.com) Reported Gains on 1LM2
!CPU
!Modification
!Part Used
!L
!C
!f / f0
|-
| rowspan="10" |1LM2
| rowspan="10" |Addition of
parallel inductor
|180uH
|90uH
| rowspan="10" |180pF
|1.45
|-
|100uH
|64uH
|1.75
|-
|82uH
|56uH
|2.0
|-
|47uH
|37uH
|2.43
|-
|33uH
|28uH
|2.75
|-
|28uH
|24uH
|3.05
|-
|22uH
|20uH
|3.3
|-
|15uH
|14uH
|4.0
|-
|10uH
|9.5uH
|4.8
|-
|8.2uH
|7.8uH
|5.3
|}
{| class="wikitable"
|+Ken Sumrall (brouhaha.com) Reported Gains on 1LF5
!CPU
!Modification
!Part Used
!L
!C
!f / f0
|-
| rowspan="4" |1LF5
| rowspan="4" |Addition of 
parallel inductor
|82uH
|56uH
| rowspan="4" |180pF
|1.8
|-
|47uH
|37uH
|2.2
|-
|33uH
|28uH
|2.5
|-
|12uH
|11uH
|4.0
|}
[https://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv015.cgi?read=78272 Karl Schneider] followed the above method for a HP-11C with 1LF5 and reported ~2.5x for 33uH.

[http://www.finetune.co.jp/~lyuka/interests/calc/hp15c/ Takayuki Hosoda] (Lyuka) reported in October of 2009, conducted comprehensive measurement and modification on 1LM2 machines and replaced both the inductor and capacitor. The speedup factor is derived by runtime required to solve the nqueen problem. The baseline performance is a time of [https://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/articles.cgi 79:10].
{| class="wikitable"
|+Lyuka's Reported Gains on 1LM2
!CPU
!Modification
!Part Used L
!Part Used C
!f / f0
!note
|-
| rowspan="4" |1LM2
| rowspan="4" |Replacement of both
inductor and capacitor
| rowspan="4" |47uH
|68pF
|3.156
|25:5
|-
|47pF
|3.405
|23:15
|-
|33pF
|3.862
|20:30
|-
|27pF
|4.077
|19:25
|}
In addition, an bypass capacitor between 1 and 10uF, preferably the MLCC type is recomended to be added near the LC to the powerline for stable operation. The main bypassing capacitor is also recommended to be replaced with a 100uF capacitor for longer memory retention time during battery swap, and a protection diode of the BAT43 type across the battery terminal.

In September of 2022, [[User:Phoenix|Phoenix]] followed Lyuka's recommendations and derived an larger 20pF parasitic capacitance. The performance gain was measured using a pocket scope:
{| class="wikitable"
|+Phoenix's Reported Gains
!CPU
!Modification
!Part Used 
!L
!C
!f / f0
!note
|-
| rowspan="3" |1LM2
(855kHz)

SMD
| rowspan="2" |Replacement of both
inductor and capacitor
|27uH
68pF
|27uH
|68pF
|3.801
|3.25MHz
|-
|47uH
68pF
|47uH
|68pF
|2.959
|2.53MHz
|-
|Replacement of inductor
|47uH
|47uH
|180pF
|1.942
|1.66MHz
|-
| rowspan="2" |1LM2
(831kHz)

thruhole
| rowspan="2" |Addition of inductor
|27uH
|23uH
| rowspan="2" |180pF
|2.852
|2.37MHz
|-
|47uH
|37uH
|2.292
|1.90-1.91 MHz
|}
Note, an unfortunate side effect of speeding up the calculator is that key-bouncing, or the calculator registering multiple key inputs for every player input, due to bouncing in the keyboard mechanism, is greatly increased in frequency. 

== See also ==

== References ==
<references />