Sharp EL-8: Difference between revisions

From CALCVERSE
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 9: Line 9:


== Internal design ==
== Internal design ==
The calculator uses 2 PCBs internally, one is the logic board, and the other is for the display and power supply, both seat into a card-edge connector mounted to the keypad assembly.
The calculator uses 3 PCBs internally, one for the logic, one for the display, and another for the power supply, the logic board and display board slotinto a card-edge connector mounted to the keypad assembly, with the power board being connected to the display board via a wired connector.


The calculator uses a [[reed switches|reed-switch]] keypad, [[:Category:VFD|Vacuum Fluorescent Displays]] (8x Itron [[Itron DG10L|DG10:]] and 1x Itron [[Itron SP-8A|SP-8A]]), and 9 [https://en.wikipedia.org/wiki/Integrated_circuit Integrated Circuits], the [[Rockwell]] [[Rockwell DC1152|DC1152]], and the [[Rockwell NRD2256|NRD2256]].
The calculator uses a [[reed switches|reed-switch]] keypad, [[:Category:VFD|Vacuum Fluorescent Displays]] (8x Itron [[Itron DG10L|DG10:]] and 1x Itron [[Itron SP-8A|SP-8A]]), and 9 [https://en.wikipedia.org/wiki/Integrated_circuit Integrated Circuits], the [[Rockwell]] [[Rockwell DC1152|DC1152]], and the [[Rockwell NRD2256|NRD2256]].

Revision as of 21:32, 14 July 2022

Sharp EL-8
Sharp EL-8.jpg
ManufacturerSharp
Introduced1970
Calculator
Display typeVFD
Display size8 digits
Programming
Other
Serial Numbers1012099

The Sharp EL-8 was an early handheld calculator produced by Sharp.

Special features

Since the calculator uses the Itron font tubes it does not feature leading-zero supression, to help with readability (e.g. it would display '00000001' to display '1').

The calculator uses separate 'minus equals' and 'plus equals' keys, as well as a single key for multiplication and division, this was common for the time period.

Internal design

The calculator uses 3 PCBs internally, one for the logic, one for the display, and another for the power supply, the logic board and display board slotinto a card-edge connector mounted to the keypad assembly, with the power board being connected to the display board via a wired connector.

The calculator uses a reed-switch keypad, Vacuum Fluorescent Displays (8x Itron DG10: and 1x Itron SP-8A), and 9 Integrated Circuits, the Rockwell DC1152, and the NRD2256.

Gallery

External Resources

  • []

See also