Sharp EL-8

Revision as of 09:49, 22 September 2023 by Audrey (talk | contribs) (add links to external resources section)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Sharp EL-8 was an early handheld calculator produced by Sharp starting around December 1970.

Sharp EL-8
Sharp EL-8.jpg
Other namesFacit 1111, ADDO-X 9364
ManufacturerSharp
Introduced1970
Calculator
Display typeVFD
Display size8 digits
Programming
Other
Serial Numbers1012099

Special featuresEdit

Since the calculator uses the Itron font tubes it does not feature leading-zero supression, to help with readability (e.g. it would display '00000001' to display '1').

The calculator uses separate 'minus equals' and 'plus equals' keys, as well as a single key for multiplication and division, this was common for the time period.

Internal designEdit

The calculator uses 3 PCBs internally, one for the logic, one for the display, and another for the power supply, the logic board and display board slot into a card-edge connector mounted to the keypad assembly, with the power board being connected to the display board via a wired connector and mounted with screws.

The calculator uses a reed-switch keypad, Vacuum Fluorescent Displays (8x Itron DG10L and 1x Itron SP8A), and 9 Integrated Circuits, the Rockwell AC2261, AU2271B, DC1152A, NRD2256, the Hitachi HD3121, and the NEC μPD190C.

Sharp EL-8Edit

The Sharp EL-8 came in the colors black and white.

GalleryEdit

Carrying caseEdit

The Sharp EL-8 came with a carrying case, the zipper latches shut and the carrying handle can button into 2 positions, with the handle extended or retracted.

Sharp EL-81 Power brickEdit

The Sharp EL-8 came with a Sharp EL-81 power brick for charging and powering the calculator.

EL-84 BatteryEdit

The Sharp EL-8's battery pack is a 7.2v rechargable nickel-cadmium (NiCad) pack made up of 6 AA-sized cells.

Facit 1111Edit

ADDO-X 9364Edit

Battery-bypass capacitor modEdit

To bypass the requirement of the battery pack you can put a capacitor across the battery terminals, a 470uf 16v cap is approximately what you want.

This mod uses D-SUB pins ("nixie pins") soldered to the capacitor, and the capacitor hot-glued in-place of the battery, to make the mod reversible.

External ResourcesEdit

See alsoEdit